The DEWALT DWE7491RS is the stronger all-around pick if you need a rolling stand, 32-1/2 inches of right-side rip capacity, and a jobsite saw that is comfortable around sheet goods. The SKIL TS6307-00 makes more sense if the saw will live in a garage, fold away between projects, and mostly handle homeowner or weekend-shop cuts.
As an Amazon Associate, Worth Adding earns from qualifying purchases. We may earn a commission if you buy through our links.
Choose the DEWALT for capacity, rolling mobility, and contractor-style work. Choose the SKIL when storage, lower commitment, and occasional shop use matter more than maximum rip width.
Both saws sit in the same 10-inch, 15-amp portable table-saw class, and both use rack-and-pinion fence systems. The meaningful split is capacity and transport: DEWALT gives you a bigger right rip, a rolling stand, and a heavier site-ready package.
The SKIL is not a throwaway alternative. It still has a 25-1/2 inch right rip capacity, rack-and-pinion fence rails, 4x4 cutting capacity at 90 degrees, and integrated folding legs. It is the cleaner fit when you do not need to break down full sheet goods every week.
A contractor-leaning portable table saw with a 10-inch blade, included rolling stand, 32-1/2 inch right rip capacity, and rack-and-pinion telescoping fence rails.
A compact 10-inch jobsite table saw with a 25-1/2 inch right rip capacity, integrated folding legs, rack-and-pinion fence rails, and a dust port elbow.
These are both 10-inch, 15-amp portable saws. The buying decision comes down to the material you rip most often, how often you move the saw, and how much folded storage matters.
The DEWALT has 32-1/2 inches of right rip capacity versus 25-1/2 inches on the SKIL. That gap matters most when you are breaking down wider sheet goods or trimming large panels without a track saw.
A rolling stand helps when the saw travels or shifts around a work area. Integrated folding legs are better when the saw lives against a wall, under a bench, or in a small garage.
SKIL lists a deeper 3.5 inch cut at 0 degrees, while DEWALT lists 3-1/8 inches. Both handle common 2x material, but blade setup, work support, and safe feed technique matter more than chasing the biggest number.
The table focuses on specs that change ownership: rip width, stand style, cut depth, motor speed, and how the saw stores between cuts.
| Metric | DEWALT DWE7491RS | SKIL TS6307-00 |
|---|---|---|
| Best fit | best overallContractors, remodelers, and serious DIY buyers who need wider rip capacity and a rolling stand. | Homeowners, garage shops, and DIY buyers who want a capable 10-inch saw that folds away cleanly. |
| Model | DWE7491RS | TS6307-00 |
| Motor / speed | 15 amp motor / 4,800 rpm no-load speed | 15 amp motor / 4,600 rpm no-load speed |
| Table / storage size | 31 x 24.5 x 31 in; 21-7/8 x 26-3/8 in table | 24 x 25 in table; 32 in unfolded height; 14-1/4 in folded height |
| Stand and dust setup | Rolling stand included; 2-1/2 in dust collection port; onboard storage for guard, fence, riving knife, miter gauge, wrenches, push stick, and cord. | Integrated folding stand; dust port elbow; SKIL lists support for an 8 in dado blade set with the proper insert and a 5/8 in max dado width. |
| Main drawback | It is the bigger commitment: DEWALT lists the saw at 90 lb, and the rolling-stand package is more machine than many occasional garage users need. | The smaller 25-1/2 inch right rip and no true rolling stand make it less convenient for frequent sheet-good work or daily site moves. |
| Ownership note | The DEWALT spec sheet points toward jobsite productivity: wider ripping, a larger support table, onboard storage, and a stand built for setup and breakdown. | The SKIL spec sheet points toward compact ownership: folding legs, 4x4 cutting capacity at 90 degrees, parallel blade alignment, and a garage-friendly footprint. |
We compared manufacturer-published specifications, included stand design, cutting capacity, storage details, dust-management notes, and product-specific Amazon destinations. Prices, star ratings, and review counts were left out because they change quickly and were not needed for the recommendation.
DEWALT publishes 32-1/2 inches of right rip capacity, 22 inches left rip, 4,800 rpm no-load speed, 3-1/8 inch max cut at 90 degrees, and a 90 lb product weight for the DWE7491RS. SKIL publishes 25-1/2 inches right rip, 14 inches left rip, 4,600 rpm no-load speed, and 3.5 inch max cut at 0 degrees for the TS6307-00.
We weighted capacity, stand mobility, folded storage, work support, and dust setup because those details decide whether a portable saw feels helpful or irritating after the first few cuts.
DEWALT is the better default for jobsite work and larger panels. SKIL is the better fit for a garage shop, homeowner punch list, or buyer who wants a real saw without a rolling-stand footprint.
The DEWALT spec sheet points toward jobsite productivity: wider ripping, a larger support table, onboard storage, and a stand built for setup and breakdown.
Sources: DEWALT and retailer listing.
The SKIL spec sheet points toward compact ownership: folding legs, 4x4 cutting capacity at 90 degrees, parallel blade alignment, and a garage-friendly footprint.
Sources: SKIL and retailer listing.
The DEWALT is the better choice. Its 32-1/2 inch right rip capacity gives more room for wider rips than the SKIL TS6307-00, which tops out at 25-1/2 inches to the right of the blade.
Yes, for many homeowners. It has a 10-inch blade, 15 amp motor, rack-and-pinion fence rails, 25-1/2 inch right rip capacity, and folding legs. It is a strong fit for trim, dimensional lumber, smaller panels, and garage projects.
Yes. The DEWALT DWE7491RS includes a rolling stand. The SKIL TS6307-00 has integrated folding legs that form its stand. The difference is how they move and store, not whether you get support at all.
The SKIL is easier to make small between projects because the legs fold into the saw package. The DEWALT rolls more conveniently, but its larger rolling-stand setup is meant for capacity and jobsite movement rather than minimal storage.
A careful beginner can buy either, but they should also budget for work support, a good blade, hearing and eye protection, dust collection, and time to learn safe setup. The SKIL is the less intimidating ownership fit; the DEWALT is the better long-term site tool.
Its 32-1/2 inch right rip capacity, rolling stand, 4,800 rpm no-load speed, and larger support table make it the safer default for remodelers, trim work, shelving, and sheet-material cuts.
Last checked: . Retailer availability, coupons, delivery estimates, and other listing details can change without notice.